Bike Servicing in Mansfield

Basic Service – £38

A full safety inspection with adjustments to all key components:

• Mechanical brakes and gears checked and adjusted

• All moving parts inspected

• All bolts and fittings checked and secured

• Tyres inspected and inflated to the correct pressure

• No new parts fitted during this service

Interim service £60

Includes everything in the Basic Service, plus more in‑depth adjustments to resolve brake and gear faults:

• Mechanical brakes and gears serviced to correct any issues

• Replacement of brake pads, gear cables and brake cables (externally routed) where required

• Hubs inspected and adjusted for smooth operation

• Drive train components (chain, chainrings, cassette and derailleurs) inspected for wear and correct function

• Disc brake calipers re‑aligned with rotors

Full service £95

Includes everything in the Interim Service, plus a full strip‑down and inspection of all major components:

• Complete strip‑down, clean and inspection of hubs, headset and bottom bracket

• Bearings cleaned, re‑greased and refitted, or replaced where required

• Chain and cassette inspected, tested and replaced as needed

• Full service of mechanical and hydraulic brakes

• Hydraulic brake fluid bled or replaced where required

• Brake calipers cleaned and re‑aligned with rotors

• Brake pads replaced as required, with piston inspection to identify any leaks

• Wheel rims and spokes inspected, with wheels trued where possible

• (Note: damaged wheels cannot always be fully trued; additional charges apply for replacing missing or damaged spokes)

• Puncture repair included, with tyres/inner tubes replaced as required

• (Excludes tubular and solid tyres; surcharge applies for tubeless tyres)

Ultimate service £155

Includes everything in the Full Service, plus a complete strip‑down and deep overhaul of all major components:

• Full strip‑down of the entire bike, with frame, wheels and all components inspected, cleaned and expertly re‑fitted

• Freehub service, including inspection and replacement of bearings, pawls and springs; installation of a new freehub if required

• Chain-ring replacement as needed

• Crank replacement as required

• Replacement of internally routed gear and brake cables/housings (where applicable)

• Pedal service — pedals examined, cleaned and re‑greased

• Seatpost and saddle service — seatpost inspected for fatigue, cleaned and reinstalled with appropriate anti‑seize or friction paste; seatpost clamp/QR cleaned and re‑greased; saddle inspected (not removed from clamp)

• Frame polish

Important notes:

• Electronic shifting wiring, connectors, batteries, bar‑tape, under‑tape housings, internally routed bar/stem housings and shifters will not be removed

• Handlebars will not be removed from the stem (stem bolts will be inspected)

• Internally routed hydraulic hoses will not be removed

• Internally routed gear and brake cables through the frame will be removed and replaced if required

Please advise if you have had a bike fit, as this may affect component positioning.